Category: Jordan

I create a shaded orange square whose height matched that of the column shafts.

I circumscribe a circle around it, and I notice that the intermediate column axes are halfway between the sides of the square and the vertical tangents to the circle. The span between those orange vertical axes is therefore 1.207 = (1 + root2)/2.

The same circle reaches up to height 1.207, at the base of the figural frieze in the entablature.

I also create an arc whose center is the centerpoint of the façade baseline, so that it sweeps through the upper corners of the shaded square. The top of this arc locates the top edge of the capitals. This geometry relates to the Golden Section (Phi), such that the top edge of the capitals lies Phi-1 = 1.618 -1 = 1.118 units above the baseline. In other words, the height of capitals is 11.8% as great as the height of the shafts. The big double square that you discovered in your analysis, similarly, is 11.8% bigger than the one I got from the pier axes.

I also infer from this structure that the inner column axes are supposed to be .500 units apart, and that the greater displacement of the right-hand one is a mistake. I carry those orange axes upward to the top of the composition.

To climb upward, I first draw 45-degree lines from the corner of the shaded square, so that they converge at height 1.500. The slope of the main pediment seems to have been set by connecting the vertex of the resulting triangle with the points at height 1.207 on the outer column axes.

The principal horizontal crease just above the pediment is at height 1.618, i.e. exactly the Goldne section of the first story’s column height. This height can be found by unfolding the half-diagonal of the shaded square, and the heavy orange arc indicates. This will be a big deal for later.

Meanwhile, I also note that the orange diagonals launched from the column axes at height 1.000 converge at height 1.802, locating the top of the main blocks in the statue bases. These lines continue upwards to meet the column axes at height 2.618, or 1+Phi, which locates the base of the second, broken, pediment.

The top of the second story capitals falls at height 2.427, i.e. 3/2 Phi, as the three green semicircles along the left margin of the graphic indicate.

The base of the figured frieze seems to fall at height 2.496, which is Phi (1.118), found by unfolding the big green arc from the corner of the big double-square in first story, whose corner is the outboard corner of the capital.

The middle of the urn above the tholos appears to be at height 3.236, which is 2 Phi, so that the whole composition up to that level is a big Golden Rectangle, of which two subquadrants are shown gold-shaded in the graphic.

Although the photogram source image doesn’t clearly show the horizontal lip cut into the cliff above the main façade structure, it is tempting to imagine that it is 1.118 times larger, so that the whole composition would be an even larger Golden Rectangle precisely framing the outer corners of the façade structure.

Cool, eh?

This is the so-called Treasury from Petra, Jordan. The source image comes from Judith McKenzie, The Architecture of Petra. British Academy Monographs in Archaeology 1. Oxford: Oxford University Press, 1990, plate 80.

Circumscribe an octagon around the circle, and note that its facet length of .586 establishes the notional span between the axes of the main tetrastyle subtemple; the left hand column is too far to the left, for reasons to be considered below. Within the .586 facet space, step down by quadrature to find the width of the door opening (.148) and the width of the door frame (.207), though this time the alignments are better at right. More precisely, note the vertical alignments at the following heights:

.086—baseline of the central door

.207—baseline of the lateral “windows”

.354—molding on the lateral “windows”

.396—molding on the central door frame

.574—the base of the first story entablature

.646—bottom edge of the column bases in second story

.707—molding on upper statue pedestals

Following up on the octagon theme, step inward twice via octature the circle circumscribing the original unit square, and twice more from the circle of diameter .586 framed by the facets of the first octagon introduced in step Bork2. From the smaller, one finds the following heights:

.388—baseline of the main portal lintel

.750—main molding in the central tholos niche

From the larger, one finds:

.038—baseline of the central portal area

.962—moldings on the upper lateral “windows”

1.104—baseline of the second main entablature.

Note also that the vertical dropped from the diagonal at height .962 conforms closely with the edge of the “window” and the column below on the right-hand side, and that a similar relationship can be made with the next column inward, but that the relationships differ slightly on the left side, suggesting possible confusion on the builders’ part between axes and edges, or between successive steps in the octature process, or both.

To describe the upper part of the structure, step outward with octature, and then build diagonals off of that toward the apex of the composition. More specifically, if one steps out by a single octature step from the original circle seen in step Bork1, the midpoint of its upper facet will be at height 1.041, locating the tops of the column shafts in the second story. This lateral facet of this octagon corresponds closely with the right margin of the structure, and this relationship is perfect in its extension into the Doric frieze of the second entablature. Again, this is less precise on the left side, but the frieze steps inward with respect to the column below, suggesting that the builders had realized their error and were trying to fix it. The diagonal extensions of this octagon converge at height 1.500, a key point on the tholos elevation, and the raking edges of the broken pediment are defined by lines dropping from this convergence point to the points on the outer frame at height 1.153, which is where the original circle cuts its own upper octagon ray. Another horizontal level just above on the outer frame is at height 1.265, one ocature step up from the previous. The tips of the broken pediment are at height 1.367, where their slope is cut the by verticals rising from the intersections at height 1.104. There are key points on the obelisk at height 1.500 and 1.582, where diagonals from the previously described octagons converge, and its tip was probably originally at height 1.672, where an analogous structure once octature step larger would converge.

Et voila…

This is the so-called Monastery from Petra, Jordan. The source image comes from Judith McKenzie, The Architecture of Petra. British Academy Monographs in Archaeology 1. Oxford: Oxford University Press, 1990, plate 139.